Recent content by samnorman21

Hi Sports! Thanks for your help. See attached picture of sadp setting when laptop is plugged direct into router. Anything of note? I went on to camera settings through the web browser plugged into my laptop and shows the attached. Thanks Sam

Hi, So I’ve gone back and took some more pictures of SADP set up (attached); I note in pic 1926 my ipv4 dhcp says off, and him connect status shows off. I have not touched cabling which was working fine before I did the reset. I just cannot see any cameras on my nvr, and on Hik-Connect app...

Hi Sportster, So I’ve uploaded a picture of the full IP addresses, and I’ve also received password reset files for each camera and completed those. I’m not clear on how to disable all the NVR ports, nor step 3. Do I want the cameras to be on the same address as my laptop (see ipconfig picture...

Thanks! Realised it’s 6 not 8 cameras! See attached the screenshot, I was plugged into POE 4. The cameras do at least show up :) so that’s a start…

Hi, The way the system is wired there is only 1 POE used to connect with the NVR so lets of free ports to connect into. When I plug my laptop into the NVR, then what do I do? Just run the SADP app or something else? Thanks In advance

Hi Folks, I recently bought a house with a CCTV system that had been monitored. I accessed the system and could see all the 8 cameras active yesterday, but could not access them directly on the app, so did a factory reset. My NVR kicked back up, I added a new password etc but now all the...