Search results

@David cant find any such setting to adjust PoE power setting. Just that it’s on or off. @fullboogie its good to be a David @Phil any thoughts as I’d like to get a swap rather than have Poe extender when I ain’t had or needed one before for this cable run. This nvr installed April and logs...

Update @David and @fullboogie and for @Phil to for feedback. I got PoE extender and fitted. It's now been running without a loss of signal on the cable/camera in question for 26hours. The interesting thing is I didn't (on purpose) change my cable run, but simply added a new 1m Ethernet cable...

Thanks @David and @fullboogie .. Poe injector due from Amazon today. The power exception I had searched and folks indicated was just a thing that happened. Appreciate your insights and observations from the log info. Interesting that I put my original camera on earlier in week, it has a lower...

Thanks @fullboogie for reply. I have attached exported log. I you look (for example) toward end of this file you can see more of the detail where D6 (the camera in question) is lost/disconnected followed by NVR reboot which I did manually. This is log from today, so you can also see other...

@fullboogie snip of log attached. Yes exceptions. That attached is the typical log posts when the camera disappears its #D6. @Phil .. cable isn't CCA on this on. Although has been there a number of years (my 1st order with you :) ) so may have degraded. Is a mix of inside and outside as well...

@Phil .. thanks. Have put old camera back on yday. Failed losing video/connection after few hours. So not camera (phew). I find it strange that it seems an indeterminant period between fails/loss and cant seem to find anything as an event or action that links to duration. Is it possible the PoE...

2163-G0 Purchased/Installed in March. This replaced a 2532 that had been in place for 3+years. Same cable/run from NVR. I'll admit its a long run tho. From the start of May the new 2163 has had an increasing number of 'IP Camera Disconnects" which is massively frustrating and losing...

Hi all. 2wk old NVR7608 just did something 'new' today by giving message bottom right of browser screen of "Multi-screen mode only accepts live view and playback at sub-stream. For any other stream type, please switch to single-screen mode." I understand what is means but why has this just...

HI @Phil revisiting the above now I have new NVR and couple of new cameras from you working. The HIK 4A26 is a bit too big for mounting. You mentioned the HIK turret as option for ANPR is this correct? Alternatively do you guys stock the Milesight LPR cameras that I could connect to HIK NVR? My...

Thanks. I have also put a pole on a wall to the right of the snip I have provided. That is at around 2.5m height and looks across front of house + road. The pole is partially hidden in conifer hedge. My concern with 4A26FWD would be is size (length) and being a bit obvious making house look like...

@Phil thanks. Was wary of that based on other posts. Upgraded both NVR and IPC's (after issue with browser web components was stopping me showing 'failed upgrade'). I have reset all cameras to AUTO (not TCP or UDP) and NVR to TCP. Can now view both on NVR and via Camera Management. Now I need...

Received new 7608NI-I2/8p (Firmware V4.1.11 build 171204) + two new cameras DS-2CD2363G0-I & DS-2CD2163G0-I ( both @ V5.5.80 build 180911). On connecting to NVR via IE browser and after much faffing around, I could not get live view to work on NVR. Nor can I get live view to work on the two new...

@Phil thanks. I also have (I think) a 2cd2532 which is nice size, mounted vertically looking down road. What options on HIK today given we are unlit country road .. a cd2563 or cd2145? Looking at the latter as whilst a bit bigger has better IR, seems to be able to be mounted same as I have...

Hi. I had similar issue of abnormal shutdowns on 7608 of 2014 vintage. Tried many things, but ended up putting a timer on plug and forcing a reboot at 2359hrs every day by turning off/on via timer. I have had no abnormal shutdowns since doing this, so whilst not great, at least I know cameras...

Any update on availability? Looking at either replacing some of current HIK units with Milesight (and likely NVRs) or holding out for easyip4 hik. Been looking at the current milesight small vandal proof with 25fps as says good recognition of number plate possible. Appreciate thoughts and...

Hi Adam. Basically I put a timer on the socket and use that to turn off/on the NVR at midnight. No more abnormal shutdowns since. Made ton of config changes prior but without finding anything that fixed the issue. I found the idea of the timer on another forum. I am.wondering (based on IT past)...

Thanks both. Manually reset all cameras and slowly they all came back. No idea why they disappeared perhaps a "feature"

Hi . Above NVR disappeared from network along with its 6x cameras. Using SADP noted HVR was inactive, IP address was back to default. Changed both of these and NVR reactivated so could ping and access via iVMS + browser. In browser UI then found no cameras available. Settings in NVR had changed...

Agree would be kinder. I am interested in down-grading the Firmware or indeed if the one I have has been superceeded. This as my mind (I am old) is increasingly making me think this madness didn't start until I upgraded to Build 15230. But now I have done HDD format, reset, etc then all that is...

Another abnormal shutdown. @Phil for DS-7608NI-SE / P NVR I have, I have installed Firmware V3.0.15 build 151230 and Encoding version V1.0 build 140828. Are these the correct versions? I ask, as from the inevitable frustrated googling on Abnormal Shutdowns on 76xx I note a number of threads...