Search results

.... and THEN the NVR had another abnormal shutdown :-( really starting to get on my preverbials now. Rebooted. This time (unlike last week) it came back on line. Could access via browder, ivms, etc. No troubles. Some config items appear to have changed without me touching it including both...

No luck following the above. In fact in some ways it is 'worse'. This in that following typical loss of access (even tho NVR power and n/w LEDS all on) and a reboot, nothing. Did this 3 times (wife whilst I was away) but no recovery. I came back did same but then used SADP. SADP saw NVR but as...

ok. thanks. Unfortunately with what I did re post #21 above yesterday there was no success. Abnormal shutdown again this morning. Have reduced FPS down to 15 on all cameras. I did notice IPv4 gateway address in cameras was an old one so have updated that. I have this morn also disabled UPnP per...

Hi thanks both for above. Another couple of abnormal shutdowns this week. NVR still powered on (not powering down Phil), but not accessible via browser, ping or SADP. Not 'caught' it at it either as timing varies. What I have done today is. 1. Upgraded all cameras to Firmware 5.4.5 from Europe...

Hi Phil and Magic919. I have rebuilt ORBI and Router. No IP clashes on addresses. 7608 NVR set at static IP address. Interesting when I look at NVR log the 'disappearance' of the NVR certainly in Dec/Jan/Feb links to rough timing of 'abnormal shutdown' appearing in log (see attached). Most...

Hi. thanks for comments. Cant reach NVR via ping. IP's are manually defined for NVR and for camera downstream of that (different IP address range 192.168.x.x from the 10.0.0.x of LAN). Guess I could reset NVR and start again. This issue started occurring after updates to its firmware and that...

Hi Phil, see attached. Just back from working away. NVR been off 3days. Just went turned it on / off and straight back visible on SADP and browser/ivms. When I went to it, whilst power LED was on, I did not notice tx/rx LED flashing .. it did/is once I turned it on/off.

Not really as it is the network. Router connects to it, then it has landed and WiFi from it. NVR been ok with it last 5months until doing updates.

Hi PHIL .. question further to above. NVR seems to be 'disappearing'. Cant access it from iVMS or from its IP address on PC/browser. This happens overnight - although this may be coincidence when we are not using it. I physically reboot the NVR (power on/off) and it reappears. As fyi, the NVR is...

Thanks so much for help/suggestions. Will take a look at mile sight.

Hi Phil. I think so. NVR is V3.0.15 build 151230. Camera which are CD2132 (x5) and CD 2532 (x1) I have moved to 5.4. I have set MAINSTREAM's on all camera to be 1920x10P with 20fps and 4096 max bitrate. and SUBSTREAMS down to 704x576 with 20fps and 2048 max bitrate. Until doing this i was...

FIXED !! No idea what had happened, but fixed via .. 1. Ethernet lead to PoE port on NVR. Connect one of the cameras back to the PoE on NVR. 2. Use SADP to see that camera and manually set its IP address, save settings via SADP. 3. Disconnect PC from NVR, and connect it to the LAN. Access NVR...

Thanks. Thankfully not on the map ! How am I going to access the cameras as via the link in nvr virtual host it says 'camera does not exist" ; this even tho an IP address for each camera is shown in the virtual host table. Do I have to buy a Poe injector and connect each camera to a PC?

Something weird and i know folks here will help. Last Sunday i turned on 'virtual host' on my NVR 7608 (Firmware V3.0.15 build 150528). Pleased as punch, i could see IP address for each of my 6 cameras. Camera's on old versions of firmware, but i stayed away from that in 1st instance (there be...